1. SELECT TYPE OF SYSTEM REQUIRED: Super-Vision, Weld-Vision, Privacy or Environmental Series Partitions.
   
2. MEASURE-OFF AREA to partition or enclose. Can be a straight run, two, three or four-sided, or multi-station partition. (See example above, A+B+C=Total Linear Feet). No need to figure your hardware components or exact layout, factory will determine unless specific needs apply. For systems, the factory adds 10% to curtain width for drape.
   
3. DETERMINE THE HEIGHT and order partition system to exact height required. (Normal tolerance is +/- 1"). Floors are not always even, take measurement from highest point of floor. Factory deducts 2" from curtain height to allow for track and rollers on systems.
   
4. SELECT THE COLORS DESIRED. Super-Vision & Weld-Vision are supplied with one color below the see-through section and another color above the see-through section. Available in 14 mil thick vinyl fabric. Privacy Series is supplied in 14 mil solid color vinyl fabric (no see-thru section). Environmental Series is supplied in 22 mil, translucent, off-white reinforced vinyl fabric only.
   Color choices:

   Yellow

   White

   Blue

   Green

   Red

   Gray

   Black

   
   
5. SELECT DESIRED HANGING OR MOUNTING METHOD. Standard mounting is for suspension from chain. Hardware can also be supplied for threaded rod, flush-to-ceiling or wall mount, at no additional charge. "C" clamps and free-standing floor mount available for an additional charge.

SYSTEM PRICING: GLIDEWALL SYSTEMS are priced by the linear foot. Price includes partition, track, rollers, connectors/supports and all necessary hardware (except chain or threaded rod), and includes 1 curved track section per 20 ft. run (if needed).