 |
SINGER
SAFETY COMPANY 2300 N. Kilbourn Ave. Chicago, IL 60639 Phone: 800-621-0089 Fax: 773-235-0363 |
|
 |
|
Acoustic Enclosures |
| Noise/Work Station Enclosures: Most noise problems are controlled best by a combination of barriers and absorbers. The barrier is used to enclose the noise, and the absorber material on the inside of the enclosure controls reverberation, thereby increasing its overall effectiveness. |
 |
||||||||||||||||||||||
 |
Typical noise reduction of 12 to 15 dBA | ||||||||||||||||||||||
|
Ideal for use around noisy machines | ||||||||||||||||||||||
|
Easy to setup . . . similar to installing a tool crib | ||||||||||||||||||||||
| Enclosures are designed to surround
the noise source from three sides and overhead. . . eliminating
the need to control noise reverberation off the ceiling. Provides
protection for employees inside the enclosure as well as reducing
noise levels transmitted to other areas. Available in standard sizes only.
|
|||||||||||||||||||||||
An effective noise
barrier that's there when you need it ... and rolls easily out of way when you don't! |
||||||||||||||||||||||||||||||||
 |
Rollers glide smoothly permitting panels to be stacked out of the way for easy access. All hardware required for installation is included. Please indicate number of panels and linear feet of enclosure (total width). Suspending hardware from chain is the standard mounting method, however, hardware for threaded rod or flush-to-ceiling is also available. Panels are 1" thick QFM/mass loaded vinyl. |
|||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
